On this page, you are going to get the original link of Hotwav Venus X2 MT6572 V4.4.2 Firmware Flash File 100% Tested You can download it on your computer from here. The firmware includes a flash file, USB driver, how to flash manual and Flash tool.
Here are some guidelines which will help you to flash any stock ROM or custom ROM utilizing the SP flash tool (Smartphone flashing tool). Remember, the process will only work on Windows PC.
Prerequisites: Before you start this flashing process, the battery of your phone is required to have 50 to 60% charge at least.
Hotwav Venus X2 Flash File (100% Working)
- Rom Brand Name: Hotwav
- Model Name: Venus X2
- Android Version: 4.4.2 KitKat
- Chipset Model: Mediatek 6572
- Firmware Version: MT6572__HOTWAV__Venus_X2__d958__4.4.2__ALPS.KK1.MP6.V1.rar
100% Tested & Money Back Guaranty
…………….100000% Tested Without Monkey Virus……………
……….THIS FIRMWARE READ FROM NEW SMARTPHONE………
Now Can Download Only Paid User…….
Download Link: Mirror Link
………..CM2 Read Info………..
Device Brand : HOTWAV
Device Model : d958
Device CPU : MT6572
Device IntName : d958
Device Version : 4.4.2
Device Compile : 1/22/2016 12:24:46 PM
Device Project : ALPS.KK1.MP6.V1
Device ExtInfo : Venus_X2
Hotwav Venus X2 How To Flash
First, you have to download the Android USB driver according to your device. Then, install it on your computer. (Skip this step, if you the driver is already installed)
Switch off your device. Once it is switched off, remove the battery. (if the battery is non-removable, just turn off the phone)
Now, you have to download the stock or custom Rom according to your device model. Then, extract it.
Download the SP flashing tool and extract it.
From the extracted files run Flash_tool.exe and install it.
Go to the download tab once you finish installing tool
Tap on the scatter loading button
Browse the scatter file from the Stock or custom Rom folder and select it
Then, click on the Download button above to start flashing.
Connect your device to the computer with the help of a USB cable being the battery removed. Once you connect the device to the computer, press Volume up or down key and it will help the computer to detect your device easily.
You will get a confirmation green signal once the flashing is completed.
Now, shut the SP flashing tool off and discharge your device from the computer.
[#] The guidelines stated above just works on stock and custom ROM that includes scattering file. Normally, it works on MTK based devices.
[#] We recommend you to backup all your important resources from your device before you start the flashing process or you will lose all the important data in your phone.
[#] Once you finished flashing your device, you can go along with How to flash IMEI using SN Write Tool to repair the IMEI of your device.